SS-021 two-layer butterfly anklet: gold-tone steel chains with a shell-inlay butterfly drop and extender. MOQ is 100 pieces per style, samples in about 15 days and bulk production in about 45 days.
Custom 2-Layer Stainless Steel Anklet with Butterflies
Jewelrystainless steelMOQ 100Code SS-021
| material | stainless steel |
|---|---|
| color | golden |
| MOQ | 100 pcs per style / color |
| Material | stainless steel |
| Item code | SS-021 |
Request a quote for Custom 2-Layer Stainless Steel Anklet with Butterflies
100 pcs MOQ · ~15-day samples · ~45-day bulk production · NDA & IP protection · custom logo, size & material.
Flame soldering the chain, then filing it by hand — the metal line on our floor.
Product details
This stainless steel anklet layers two fine gold-tone chains - a flat cable strand and a rolo strand - with small flat butterfly charms scattered along both rows. The centerpiece is a larger open-frame butterfly with white shell-inlay wings that sits at the front of the ankle when worn. A lobster clasp and extender chain finish the piece.
The two-layer silhouette reads as a stacked look without needing separate anklets, which makes it an easy single-SKU add-on for boutique jewelry walls and e-commerce sets. The shell-inlay butterfly photographs well against skin and denim, so it suits summer capsule drops, resort lines and festival merchandising.
As the factory we support MOQ is 100 pieces per style. We can adjust chain styles, change the shell inlay to enamel or resin, plate to your finish specification, and laser-engrave your logo on the extender tag. For OEM/ODM details, browse our stainless steel jewelry line and read five stainless steel jewelry styles for OEM wholesale.
FAQ
What is the butterfly inlay made of? The centerpiece uses a natural shell inlay set in a gold-tone frame, as shown in the product photos; alternative inlays can be quoted on request.
Is the anklet adjustable? Yes - it has a lobster clasp plus an extender chain for a flexible fit.
Can I order a sample first? Yes - samples in about 15 days and bulk production in about 45 days. To start, request a quote or review our material safety and testing notes with your order.
How this bead bracelet is verified
- Material: built in stainless steel as listed in the spec table — checked at incoming QC and again before packing.
- Skin-safety & corrosion: metal parts in skin contact are verifiable against ASTM B117 salt spray and EN 1811 / EN 12472 nickel-release standards; test reports and certificates are available on request per order (see our compliance & testing page).
- Process control: ~15-day pre-production sample for your approval, ~45-day bulk production, QC on every batch before shipment.
- Terms: MOQ 100 pcs per style & color · NDA & IP protection on every order.
From our production floor
How it is made. Pieces are produced by casting, laser cutting, or wire forming from 316L stainless steel, then polished and finished — most color comes from PVD vacuum plating, which bonds as a dense film under vacuum rather than a surface wash. Engraving and plating are done in-house, so the sample-to-production lead time stays predictable.
What we can customize. What we can customize: logo engraving on the clasp, extender tag or back; PVD color matched to your Pantone; chain or component swaps; shell or stone inlay on request. A sample always comes before a full run.
What to send us. Send us a vector/3D file or a reference sample, the target grade (316L by default), the PVD color or Pantone, your per-style quantity, and any certification your market requires (CE, RoHS, FCC supplied on request).
Where we draw the line. What this is not built for: solid gold or heavy gemstone setting beyond a simple inlay, and very deep carving that changes the tooling — those are settled at the sample stage, not after production has started.
Request a quote for Custom 2-Layer Stainless Steel Anklet with Butterflies →