JOX-034 woodgrain two-layer flat case: antique-brass clasps, necklace hooks and a folding stud board. MOQ is 500 pieces per style, samples in about 15 days and bulk production in about 45 days.
2-Layer Jewelry Travel Organizer Box for Collectors
OrganizerswoodMOQ 500Code JOX-034
| material | wood |
|---|---|
| color | brown |
| MOQ | 500 pcs per style / color |
| Material | wood |
| Item code | JOX-034 |
Request a quote for 2-Layer Jewelry Travel Organizer Box for Collectors
500 pcs MOQ · ~15-day samples · ~45-day bulk production · NDA & IP protection · custom logo, size & material.
Fitting ring rolls and dividers into a jewelry tray insert at the bench.
Product details
The JOX-034 jewelry organizer is a low-profile case in dark woodgrain finish, closed by two antique-brass clasps - one on the front edge, one on the lid top. Inside, cream velvet lines the lid with four necklace hooks, and a folding display board props upright to show studs and drops; the base below lays out two ring-roll rows beside two open sections sized for bracelets and a watch.
The flat, briefcase-like profile slides into drawers and luggage alike, and the folding stud board doubles as a counter display when the case is open - one SKU serving both storage and retail demonstration duties.
We produce this case on our own line, MOQ is 500 pieces per style. Woodgrain tone, velvet colour, clasp finish and foil-stamped logos are open to OEM adjustment - see custom jewelry boxes with your logo. Our guide to jewelry display cases for retail buying covers the display angle, and the jewelry organizer line lists companions.
FAQ
Does the stud board stand up? Yes - the folding board props upright inside the open lid, as shown.
How does it close? Two antique-brass clasps - one front, one top - hold the flat case shut.
Can I order a sample first? Yes - samples in about 15 days and bulk production in about 45 days. Request a quote and review our material safety and testing page.
How this bead bracelet is verified
- Material: built in wood as listed in the spec table — checked at incoming QC and again before packing.
- Hardware & construction: zippers, hinges, clasps, stitching and lining are inspected at incoming QC and at final inspection.
- Fit & function: your insert layout, size and logo are approved on a pre-production sample before the bulk run.
- Process control: ~15-day samples, ~45-day bulk production, QC on every batch before shipment.
- Terms: MOQ 500 pcs per style & color · NDA & IP protection on every order.
From our production floor
How it is made. Boxes are built from a cutting die for the shell, then lined, stitched or flocked, and assembled. We own final assembly, QC and export, so a sample and a full order run through the same loop rather than changing hands between suppliers.
What we can customize. What we can customize: shell material (velvet, faux leather, wood, PVC), foam insert layout, logo print or foil, zipper pull and ribbon. Mixed materials are possible within one style.
What to send us. Send us a reference sample or drawing, the internal dimensions or insert layout, the material and color, your per-style quantity, and any certification your market requires (CE, RoHS, FCC supplied on request).
Where we draw the line. What this is not built for: paper-only packaging runs and very low volumes — box tooling carries a higher minimum than jewelry (this style: 500 pcs per style), and a complex insert usually needs a sample round before mass production.
Request a quote for 2-Layer Jewelry Travel Organizer Box for Collectors →