Half-chain baguette ring SS-015: gold-tone open band split between mirror-polished steel and a curb-chain section, crowned by a prong-set baguette CZ. MOQ 100/style.
Stainless Steel Rings for Fashion-Forward Men
Jewelrystainless steelMOQ 100Code SS-015
| material | stainless steel |
|---|---|
| color | golden |
| MOQ | 100 pcs per style / color |
| Material | stainless steel |
| Item code | SS-015 |
Request a quote for Stainless Steel Rings for Fashion-Forward Men
100 pcs MOQ · ~15-day samples · ~45-day bulk production · NDA & IP protection · custom logo, size & material.
Flame soldering the chain, then filing it by hand — the metal line on our floor.
Product details
Stainless Steel Half-Chain Ring SS-015 splits its open band into two contrasting halves: a solid, mirror-polished bar on one side and a flexible curb-chain section on the other, meeting at a prong-set emerald-cut CZ that crowns the design.
The two-texture construction gives the ring movement on one side and structure on the other - a dainty stacking piece that still reads at listing thumbnail size.
Band width, CZ cut, chain gauge and finish (gold-tone shown; steel and rose gold-tone available) are made to order, and the open C-shape covers a practical size range for online sellers. Standard MOQ is 100 pieces per style; samples take about 15 days after artwork approval, bulk around 45 days.
FAQ
How is it sized? The open band flexes across standard sizes; fixed-size tooling is possible at MOQ.
Can the CZ be swapped for another cut? Yes - round, square and marquise cuts are all producible to your design.
What is the MOQ? 100 pieces per style.
See the stainless steel jewelry range, sort out sizing with the ring size conversion chart, read about PVD vacuum electroplating for the gold-tone finish, see how we handle material safety and testing, or request a quote.
How this bead bracelet is verified
- Material: built in stainless steel as listed in the spec table — checked at incoming QC and again before packing.
- Skin-safety & corrosion: metal parts in skin contact are verifiable against ASTM B117 salt spray and EN 1811 / EN 12472 nickel-release standards; test reports and certificates are available on request per order (see our compliance & testing page).
- Process control: ~15-day pre-production sample for your approval, ~45-day bulk production, QC on every batch before shipment.
- Terms: MOQ 100 pcs per style & color · NDA & IP protection on every order.
From our production floor
How it is made. Pieces are produced by casting, laser cutting, or wire forming from 316L stainless steel, then polished and finished — most color comes from PVD vacuum plating, which bonds as a dense film under vacuum rather than a surface wash. Engraving and plating are done in-house, so the sample-to-production lead time stays predictable.
What we can customize. What we can customize: logo engraving on the clasp, extender tag or back; PVD color matched to your Pantone; chain or component swaps; shell or stone inlay on request. A sample always comes before a full run.
What to send us. Send us a vector/3D file or a reference sample, the target grade (316L by default), the PVD color or Pantone, your per-style quantity, and any certification your market requires (CE, RoHS, FCC supplied on request).
Where we draw the line. What this is not built for: solid gold or heavy gemstone setting beyond a simple inlay, and very deep carving that changes the tooling — those are settled at the sample stage, not after production has started.
Request a quote for Stainless Steel Rings for Fashion-Forward Men →