Rose gold-tone charm anklet SS-011: engraved cat-face coin charms and bezel-set CZ beads on a fine cable chain with lobster clasp and adjuster tail. MOQ 100/style.
Stainless Steel Anklets, Durable and Stylish
Jewelrystainless steelMOQ 100Code SS-011
| material | stainless steel |
|---|---|
| color | golden |
| MOQ | 100 pcs per style / color |
| Material | stainless steel |
| Item code | SS-011 |
Request a quote for Stainless Steel Anklets, Durable and Stylish
100 pcs MOQ · ~15-day samples · ~45-day bulk production · NDA & IP protection · custom logo, size & material.
Flame soldering the chain, then filing it by hand — the metal line on our floor.
Product details
Stainless Steel Charm Anklet SS-011 strings three engraved cat-face coin charms and two bezel-set clear CZ round beads along a fine rose gold-tone cable chain. A lobster clasp closes the front and a ball-end adjuster tail lets the wearer fine-tune the length around the ankle.
Anklets are the seasonal engine of summer assortments: beach and resort drops, festival accessories and small gift bundles all take this silhouette without explanation.
Chain length, charm mix and finish (rose gold-tone shown; gold-tone and steel available) are made to order. Standard MOQ is 100 pieces per style; samples take about 15 days after artwork approval, with bulk production around 45 days.
FAQ
What is the MOQ for SS-011? 100 pieces per style.
Can we change the charms? Yes - the coin charms and CZ beads are attached individually and can be re-mixed to your design.
Is the length adjustable? Yes - the ball-end tail chain allows adjustment; we can also set a fixed length for your market.
Browse the full stainless steel jewelry range, fit it with our bracelet and necklace size calculator, read how stainless steel jewelry is made, see how we handle material safety and testing, or request a quote.
How this bead bracelet is verified
- Material: built in stainless steel as listed in the spec table — checked at incoming QC and again before packing.
- Skin-safety & corrosion: metal parts in skin contact are verifiable against ASTM B117 salt spray and EN 1811 / EN 12472 nickel-release standards; test reports and certificates are available on request per order (see our compliance & testing page).
- Process control: ~15-day pre-production sample for your approval, ~45-day bulk production, QC on every batch before shipment.
- Terms: MOQ 100 pcs per style & color · NDA & IP protection on every order.
From our production floor
How it is made. Pieces are produced by casting, laser cutting, or wire forming from 316L stainless steel, then polished and finished — most color comes from PVD vacuum plating, which bonds as a dense film under vacuum rather than a surface wash. Engraving and plating are done in-house, so the sample-to-production lead time stays predictable.
What we can customize. What we can customize: logo engraving on the clasp, extender tag or back; PVD color matched to your Pantone; chain or component swaps; shell or stone inlay on request. A sample always comes before a full run.
What to send us. Send us a vector/3D file or a reference sample, the target grade (316L by default), the PVD color or Pantone, your per-style quantity, and any certification your market requires (CE, RoHS, FCC supplied on request).
Where we draw the line. What this is not built for: solid gold or heavy gemstone setting beyond a simple inlay, and very deep carving that changes the tooling — those are settled at the sample stage, not after production has started.
Request a quote for Stainless Steel Anklets, Durable and Stylish →